Skip to main content
Qargo

Planning: assigning compartmentalized trailers at load level

Planners can assign compartmentalized trailers at the load level. A single view lets them select compartments and distribute goods from all orders on the load in one flow. The counts are correct and the full load is visible before confirming.

Table of contents
  1. Summary
  2. Prerequisites
  3. Use cases
  4. Terminology
  5. Adding trailers to loads
  6. Assigning orders to compartments
  7. Troubleshooting

Summary

What — Planners can assign orders to specific compartments of a compartmentalized trailer at load level. A compartment-assignment view opens from the load. It displays the trailer’s compartment layout and lets planners distribute goods across compartments via drag-and-drop or manual selection. Existing compartment assignments made at order level are migrated automatically.

Why — Compartmentalized trailers (for example, those used in temperature-controlled or tanker transport) require precise loading plans to comply with regulatory requirements and customer specifications. Performing compartment assignment at load level gives planners visibility of the full load when multiple orders share a trailer. This reduces loading errors and documentation discrepancies.

How — Planners open the load on the Planning board, access the compartment-assignment view, and drag or assign each order’s goods to the correct compartment. The assignment is saved to the load and reflected on load documents.

Prerequisites

  • User role: Planner or higher
  • The trailer assigned to the load must be configured with compartments
  • Compartmentalized trailer functionality must be enabled on the environment

Use cases

  • A tanker operator distributes multiple product orders across a four-compartment trailer for a multi-drop load
  • A temperature-controlled carrier assigns chilled and frozen orders to separate compartments on the same trailer
  • A planner reviews the full compartment loading plan before confirming a load

Terminology

Term Definition
Compartmentalized trailer A trailer divided into separate sealed sections, each capable of holding different goods
Compartment assignment The allocation of a specific order’s goods to one or more trailer compartments on a load
Drag-and-drop A UI interaction that moves a goods item from an unassigned state into a target compartment
Data migration The automatic transfer of order-level compartment assignments to the new load-level model

Adding trailers to loads

🎥 Watch this video and/or follow the steps below:

  1. Navigate to the Planning board.

  2. Assign the compartmentalized trailer. This can be done in two ways:

    1. Drag the trailer directly onto the desired load.
    2. Open the load and navigate to the trailers section in the Route tab.

Assigning orders to compartments

  1. Click the Assign compartments button on the load.
  2. Review the trailer compartment layout displayed in the modal.
  3. Check the boxes to add the right items to the compartments
  4. Save the compartment assignment.

The loading plan is then successfully saved to the load. The resource overview now displays how goods are distributed across the different trailer compartments.
To make further changes, simply repeat the above steps and save again.


Troubleshooting

Symptom Likely cause/resolution
Compartment-assignment icon is not visible on the load Trailer has no compartments configured.\
Add compartments to the trailer in Master data > Resources
Goods item cannot be dragged to a compartment Compartment capacity is exceeded.\
Adjust the compartment capacity in master data or reassign goods to another compartment
Data migration note shows missing assignments Order-level assignment was incomplete before migration.\
Manually assign the remaining goods to compartments