Skip to main content
Qargo

PN - Digital signatures (POD) in UK pallet networks.

Digital signatures (POD signatures) in UK pallet networks: implementation, troubleshooting, and limitations outlined by each pallet network.

Table of contents
  1. Summary table
  2. Conclusion

Digital signatures, also called ePOD (electronic proof of delivery) signatures, are a core part of modern pallet network operations. They provide verifiable proof that goods have been delivered and accepted. Each major UK pallet network (Palletforce, Palletline, TPN, Hazchem, and Pallex) has its own technical and operational requirements for capturing, exporting, and viewing these signatures. This is especially true when integrating with transportation management systems such as Qargo. This report explains how digital signatures work for each network, provides implementation details in Qargo, and highlights known limitations and troubleshooting steps for signature visibility issues.


📦 Palletforce

How digital signatures work

Digital signatures for PODs are captured at the point of delivery via the Qargo mobile app. These signatures are then uploaded to Palletforce as part of the POD data. Palletforce requires these signature images to be in .tiff format, so Qargo automatically converts signature images before upload. Only signatures captured by the Qargo app are supported for upload; signatures from other FMS systems are not currently supported. Metadata such as the receiver name, time, and location is also included in the upload, but coordinates are only available through the Qargo app.

Implementation in Qargo

  • Digital signatures are exported from the Qargo mobile app to Palletforce via the terminal API.
  • The integration code handles conversion to .tiff format.
  • Signatures are uploaded as soon as the image is available; later updates to receiver details do not trigger a re-upload.

Troubleshooting signature visibility issues

  • Ensure the terminal API mode is enabled, as this functionality is not available in customer API mode.
  • Confirm that the delivery images feature is enabled on the Palletforce side during onboarding.
  • If signatures are not visible, verify that the signature was captured in the Qargo app and not in another FMS.
  • Check that file conversion to .tiff was successful. Failed conversions may prevent upload.

Known limitations

  • Only signatures captured by the Qargo app are supported for export.
  • Upload of delivery images (photos) must be enabled by Palletforce and validated during onboarding.
  • No support for uploading signatures from external FMS systems.
  • Palletforce expects metadata (location, time, name), which is only available via the Qargo app.

📦 Palletline

How digital signatures work

Digital signatures (DSC: digital signature capture) are collected via the Qargo mobile app during delivery and exported to Palletline’s Contrado platform. Palletline requires PODs to be in .jpg or .tiff format; PDFs are not accepted. Each signature complements a previously uploaded status update, and Palletline requests coordinates for dispute resolution.

Implementation in Qargo

  • Signatures captured in the Qargo app are exported to Contrado.
  • Only .jpg and .tiff files are exported; PDFs are ignored.
  • Multiple file naming conventions exist in Contrado; only the “Filename” and “Filename - PalletlineId” modes are currently supported.
  • Qargo supports full two-way status sync and automatic import/export of PODs.
  • For non-COP shipments, Palletline generates a delivery receipt from the received signature.

Troubleshooting signature visibility issues

  • Ensure the Contrado configuration in Qargo matches the expected file naming convention.
  • Check that the signature file type is .jpg or .tiff.
  • If signatures are missing, confirm that the status update was uploaded before the signature.
  • For COP documents, ensure upload timing aligns with Palletline restrictions: COP is only imported after the ARRH scan, and if it is uploaded after the first ARRH update, it will not be imported into Qargo.

Known limitations

  • Only the “Filename” and “Filename - PalletlineId” file name modes are supported.
  • COP (customer own paperwork) is import-only and must be uploaded manually via Contrado.
  • No automatic COP import; PDFs are not exported as PODs.
  • Some file name conventions are not supported.

📦 TPN(The Pallet Network)

How digital signatures work

  • Digital signatures are captured at delivery and exported to TPN’s API via Qargo. ePOD signatures (with name, timestamp, GPS) are supported.

  • Delivery images are supported in both directions:

    • Qargo can send delivery images to TPN, and TPN delivery images are automatically synced back into Qargo when available in the portal.
  • ETA sync from TPN to Qargo is supported automatically, with no extra configuration required.

Implementation in Qargo

  • Qargo exports ePOD signatures (name, time, GPS) to TPN’s API.
  • POD documents can be imported from and exported to TPN.
  • Delivery images can be sent from Qargo to TPN when a shipment has been marked as delivered and a receiver signature is already present.
  • Delivery images uploaded by the delivering terminal in the TPN portal are automatically synced back into Qargo.
  • ETAs are automatically synced from TPN to Qargo when available—no configuration needed.
  • Cross-dock scanning and outbound ETA management must still be handled in the TPN app.

Implementation in Qargo

  • Qargo exports ePOD signatures (name, time, GPS) to TPN’s API.
  • POD documents can be imported from and exported to TPN.
  • Delivery images can be sent from Qargo to TPN when a shipment has been marked as delivered and a receiver signature is already present.
  • Delivery images uploaded by the delivering terminal in the TPN portal are automatically synced back into Qargo.
  • ETAs are automatically synced from TPN to Qargo when available—no configuration needed.
  • Cross-dock scanning and outbound ETA management must still be handled in the TPN app.

Troubleshooting signature visibility issues

  • If PODs or signatures are missing, check the TPN portal first to verify whether the POD exists on the network side.
  • If delivery images are not sent from Qargo to TPN, confirm that the shipment has been marked as delivered and that a receiver signature is already uploaded.
  • If delivery images synced from TPN appear as the wrong document type (for example, a pickup image saved as a delivery image), this is a known API limitation on TPN’s side. Differentiation between pickup and delivery images is not yet available via TPN’s API.
  • For missing ETAs, verify that the ETA is available on the TPN portal; Qargo will sync it automatically once it exists on the network side.

Known limitations

  • ETAs sync from TPN to Qargo only; sending ETAs from Qargo to TPN is not supported. ETA management for outbound legs must use the TPN app.
  • Cross-dock scanning is not available via Qargo due to API restrictions.
  • TPN’s API only accepts delivery images once a shipment has been marked as delivered and a receiver signature is already uploaded. If a delivery image is uploaded without a signature present, it will be queued and uploaded once the signature is received.
  • This delivery image upload flow only applies to shipments where the tenant is performing the delivery.
  • There is currently no way to differentiate between pickup and delivery images when syncing from TPN. Pickup images will be saved as delivery images until TPN resolves this at the API level.
  • All customer paperwork may be uploaded as POD due to API limitations.
  • Digital signatures are captured at delivery and can be exported to TPN’s API via Qargo. ePOD signatures (with name, timestamp, GPS) are supported, but delivery images have historically not been transferable from Qargo to TPN due to API limitations. The TPN mobile app remains necessary for some operations, particularly ETA management and cross-dock scanning.


📦 Hazchem

How digital signatures work

In Hazchem, digital signatures are referred to as EDC (electronic data capture). Signatures, along with the name and coordinates of the signer, are captured via the Qargo mobile app and are mandatory for compliance. POD files must be in .tiff format; Qargo converts files before uploading them to Hazchem’s FTP server. Document visibility is managed via FTP due to API file size limitations.

Implementation in Qargo

  • Signatures are captured with the Qargo mobile app only.
  • POD files are automatically converted to .tiff and uploaded to Hazchem’s FTP.
  • Only POD uploads are supported; other document types (COP, delivery images) are not currently supported for upload.
  • All other sync functions (statuses, ETAs, cross-docking) run via API.

Troubleshooting signature visibility issues

  • Ensure the FTP endpoint for POD upload is correctly configured.
  • If signatures are missing, verify that all required metadata (name, coordinates) was captured.
  • Check that the signature was captured using the Qargo app; other FMS systems are not supported.
  • Document visibility is only available via FTP, so check FTP access and file presence if signatures are not visible.

Known limitations

  • Only signatures captured by the Qargo app are supported.
  • Only POD document upload is supported (no COP or delivery images).
  • Document visibility is FTP-only due to API constraints.
  • Export only occurs when all required information is present.


📦 Pallex

How digital signatures work

Pallex supports importing and exporting ePOD data (digital signatures with name, timestamp, GPS) via its API. Qargo can upload and download both POD documents and ePOD signatures. Delivery images are also supported for both import and export. For pickups, the delivery address is not available, and the customer account code is used as the location alias.

Implementation in Qargo

  • ePOD signatures are exported from Qargo (driver mobile app) to Pallex’s API with supporting metadata.
  • POD documents uploaded into Qargo can be exported to Pallex.
  • Delivery images are automatically uploaded/downloaded as required.
  • ETAs can only be provided twice per shipment and are managed via Optimize, not directly between Qargo and Pallex.

Troubleshooting signature visibility issues

  • If signatures are not visible, confirm that the signature was captured in the Qargo driver mobile app and that all metadata is present.
  • Ensure API credentials and permissions are up to date.
  • For missing delivery images or PODs, verify that the correct document type was uploaded and that the integration is not in a pending validation state.
  • For pickups, the delivery address is not available; check the account code alias mapping.

Known limitations

  • ETAs can only be provided via the Optimize integration, and only twice per shipment.
  • For pickups, only one pickup location per account is supported.
  • Some features (for example, multi-terminal support) are pending further validation.
  • Customer paperwork (COP) is not supported for upload; only POD and ePOD are fully integrated.

📦 Palletways

How digital signatures work

Palletways supports importing the ePOD as a normal POD document into Qargo. However, Palletways does not allow Qargo to pull in eSignature metadata for use on custom document templates. Only the PDF POD that Palletways generates is available. Export of digital signature data (ePOD) from Qargo to Palletways is not supported.

Implementation in Qargo

  • Qargo imports the POD document from Palletways via FTP.
  • Only the Palletways-generated PDF is available; no metadata extraction.
  • POD documents uploaded into Qargo can be exported to Palletways via FTP.

Troubleshooting signature visibility issues

  • If PODs are missing, check whether the document was uploaded to the correct location and in the correct format.
  • For missing ePOD metadata, note that Palletways does not support this functionality.

Known limitations

  • No support for importing/exporting eSignature metadata.
  • Only PDF PODs generated by Palletways are available.
  • Customer paperwork (COP) is not supported.
  • No ETA support in the API.

Summary table

Network File format required Qargo app only? Delivery images COP support ETA support Known limitation
Palletforce .tiff Yes Yes (if enabled) Yes (import/export) Yes (3-hour window) Only Qargo app signatures, delivery images require configuration, no external FMS
Palletline .jpg/.tiff Yes Yes Import-only Yes Limited file naming, no PDF export, manual COP upload
TPN .jpg/.tiff Yes Yes (bi-\
directional, with conditions: requires receiver signature) In development TPN → Qargo only ETA/cross-dock via TPN app, all paperwork as POD
Hazchem .tiff Yes No No Yes FTP-only visibility, only POD upload, must use Qargo app
Pallex .jpg/.tiff Yes Yes No Optimize only Only 2 ETAs per shipment, no COP, pickup alias limitation
Palletways PDF (network-generated) N/A Yes No No No eSignature metadata, only PDF, no COP/ETA

Conclusion

Digital signature capture for PODs in UK pallet networks is tightly integrated with Qargo, but each network has its own technical requirements, limitations, and troubleshooting considerations. Most networks require signatures to be captured in the Qargo app, often in .tiff or .jpg format. They may also impose restrictions on metadata, document types, and upload timing. Troubleshooting typically involves verifying correct app usage, file formats, API/FTP configuration, and document type handling. Awareness of these network-specific details is essential for ensuring signature visibility and compliance in pallet operations.