---
title: "Locations - Adding documents to a location and auto-share to the driver mobile app"
description: "Locations can have their own Documents section, such as driving instructions, site maps and access rules, so site paperwork does not have to be attached by hand to every order passing through that location, and reaches drivers automatically."
url: https://help.qargo.com/us/articles/854051-locations-adding-documents-to-a-location-and-auto-share-to-the-driver-mobile-app
locale: us
updated: 2026-10-08
---

# Locations - Adding documents to a location and auto-share to the driver mobile app

## Terminology {#h_30a4197e46}

| **Term** | **Definition** |
| --- | --- |
| Location document | A file uploaded directly to a location's detail page |
| Location info for driver | Document type for driving instructions, site access info or special instructions |
| Communication | Any form of communication related to the location |
| Other | Catch-all document type for anything not covered by the above |
| Driver mobile app/carrier portal: documents | The Configuration screen that decides which document types reach the driver mobile app and the carrier portal |
| Contact tasks | A task that sends a communication (email, EDI, etc.) to a configured contact |

## Prerequisites {#h_ebee4c3b46}

The available document types need to be enabled in the **Documents** section.

:::callout{tone="note"}
🧰 **Super admin and Admin users** can configure this.
:::

1.  Navigate to **Configuration > Documents**.
2.  Select **Available document types** from the side menu.
3.  Click the **Location** tab.
4.  **Enable** the location document types.
5.  **Save**.

    ![](https://help.qargo.com/media/9d924b152bc8-image.png)


:::callout{tone="info"}
See [Documents in Configuration](https://help.qargo.com/us/articles/133800-documents-in-configuration).
:::

## Adding a document to a location {#h_9b6dc5af14}

1.  Navigate to **Locations > Locations**.
2.  Open the relevant location to add a document.
3.  Scroll to the **Documents** section, directly under the **Address** section.
4.  Click **Add document**.
5.  Choose a document type (**Location info for driver**, **Communication** or **Other**), then upload a file.
6.  **Save**.
7.  Click the **Eye** icon to preview it in the right-hand panel.

    ![](https://help.qargo.com/media/f675bd1b351a-image.png)

    ![](https://help.qargo.com/media/c5374f825703-image.png)

    ![](https://help.qargo.com/media/8a9dcf53fc02-image.png)


:::callout{tone="info"}
Location documents have no validity date: unlike resource documents, there is **no** **Valid from/to** option. Remove or replace a document manually when a site's rules change.
:::

### Sharing with drivers and contract carriers {#h_a65eff9548}

:::callout{tone="note"}
🧰 **Super admin and Admin users** can configure this.
:::

1.  Navigate to **Configuration > Documents**.
2.  Select **Driver mobile app/carrier portal: documents**.
3.  Click the **Location** tab.
4.  **Enable** the location document types that should reach drivers and contract carriers.
5.  **Save**.

    ![](https://help.qargo.com/media/79b3896717b4-image.png)


Once toggled on, every stop at that location automatically shows the uploaded documents to the driver (driver mobile app) and to any contract carrier (carrier portal). See [Document visibility on the mobile app](https://help.qargo.com/us/articles/133778-document-visibility-on-the-mobile-app) and [Carrier portal - Document configuration](https://help.qargo.com/us/articles/213212-subcontractor-portal-document-configuration).

:::callout{tone="note"}
🧰

-   A location document only reaches loads **dispatched after** it was added, replaced or removed. An already-dispatched load needs its task retriggered to pick up the change.
-   A contact task for a stop, order or load automatically includes location documents of the types it's already set up to attach; no extra configuration is needed. Excluding a document type on the task removes it everywhere, not just from the location. See [Tasks - Contact tasks: Viewing & sending documents](https://help.qargo.com/us/articles/596071-tasks-contact-tasks-viewing-sending-documents).
:::

* * *

## Troubleshooting {#h_0e516bceb9}

| Issue | Resolution |
| --- | --- |
| The needed document type isn't in the dropdown on the location. | Enable it for the Location object in **Configuration > Documents > Available document types**. |
| A driver or contract carrier doesn't see the document. | Confirm that the document type is enabled under **Driver mobile app/carrier portal: documents** (**Location** tab), and that the load was dispatched after the document was added. |
| There's no option to set an expiration date. | Location documents don't support validity dates. Remove or replace the file manually when it's out of date. |


## Related articles

- [Qargo mobile app: Activate the mobile app](https://help.qargo.com/us/articles/133811-qargo-mobile-app-activate-the-mobile-app.md)
- [Orders: order detail view page](https://help.qargo.com/us/articles/133883-orders-order-detail-view-page.md)
- [Carrier portal – access and configuration](https://help.qargo.com/us/articles/213193-carrier-portal-access-and-configuration.md)
- [Adding documents to resources](https://help.qargo.com/us/articles/133820-adding-documents-to-resources.md)
- [Understanding the driver mobile app](https://help.qargo.com/us/articles/133779-understanding-the-driver-mobile-app.md)
