---
title: "Rate card: multimodal rating condition configurations"
description: "New rate card conditions apply charges and third-party costs automatically based on stage type, resource type, or a specific intermodal connection in the route."
url: https://help.qargo.com/us/articles/669575-rate-card-multimodal-rating-condition-configurations
locale: us
updated: 2026-05-13
---

# Rate card: multimodal rating condition configurations

## Summary {#h_c1cd6a5ff1}

-   **What is included?**

    -   Three new condition types are now available on **customer price lists and contract carrier (cost) rate cards:** **Stage type**, **Resource type**, and **Intermodal connection**.
-   **Why was this added?**

    -   Multimodal transport rating depends on what the route looks like: whether it includes a rail or sailing leg, what equipment is used, or which specific intermodal connection is planned. Without these conditions, prices and third-party costs that vary by leg, equipment, or connection had to be entered manually.
-   **How does it work?**

    -   Each condition can be added to an existing or new rate card line and combined freely with other conditions. **Stage type** checks the legs in the route. **Resource type** checks the primary or secondary resource on the load. **Intermodal connection** matches a specific operator + connection (for example, STDR-DUB).

## Prerequisites {#h_2c6b90259d}

-   Customer or contract carrier rate cards must already be set up. See [Rates: rate card customers](https://help.qargo.com/us/articles/133865-rates-rate-card-customers) and [Cost calculation: load costs](https://help.qargo.com/us/articles/133801-cost-calculation-trip).
-   For **Intermodal connection** conditions, the relevant intermodal connections must be configured in **Resources > Intermodal operators**

    -   Select the intermodal operator and add **Intermodal connections**. See [Intermodal: create and update intermodal timetables](https://help.qargo.com/us/articles/291991-intermodal-create-update-intermodal-timetables).
-   For **Resource type** conditions, the secondary resource (trailer, container, chassis) must be assigned to the load for the rule to evaluate as expected.

## Use cases {#h_a0ca04fe5a}

-   **Road fuel surcharge based on a rail leg.** A customer's road fuel surcharge differs depending on whether the route includes a rail transfer leg. The **Stage type** condition allows the surcharge to be configured once and applied automatically on routes that contain a rail leg.
-   **Limited Quantity (LQ) surcharge on sailing legs.** When a shipment is flagged as Limited Quantity and the planned route includes a sailing transfer leg, an additional LQ surcharge applies. The **Stage type** condition turns this into an automated rule instead of a manual addition.
-   **Cost rates by secondary resource type.** Carrier and contract carrier cost rates differ based on whether a transfer leg uses a trailer or a container. The **Resource type** condition on the cost rate card differentiates rates based on the secondary resource actually assigned to the load.
-   **Connection-specific surcharges (revenue).** A shipment to Dublin can travel via a direct sailing (STDR-DUB) or via Zeebrugge (STDR-ZEE + ZEE-DUB). With the **Intermodal connection** condition, each route variant can carry a different rate without manual selection.
-   **Connection-specific third-party costs (cost).** A "Cost reallocation" or third-party resource on intermodal loads can now be rated automatically based on the planned intermodal connection. This removes the need for manual cost entry per load.

* * *

## Terminology {#h_14da6b97e1}

| **Term** | **Definition** |
| --- | --- |
| **Stage type** | The classification of a transport leg in Qargo: Transfer, Pickup, Delivery, or Empty. |
| **Resource type** | The kind of resource assigned to a load (Trailer, Container, Chassis, Ferry resource). Applies to the primary or secondary resource. |
| **Intermodal connection** | A predefined route segment between two points operated by an intermodal carrier, such as STDR-DUB. |
| **Contract carrier rate card** | A cost-side rate card used to calculate third-party costs for a load, including reallocations and external resources. |
| **Customer price list** | A revenue-side rate card that defines what a customer is charged for a transport order. |

:::callout{tone="info"}
🧰 The new conditions are available out of the box on existing customer and contract carrier rate cards. No feature flag is required.
:::

* * *

## Stage type condition {#h_ef233c40c1}

The **Stage type** condition triggers a charge or cost when the planned route contains at least one leg of the selected stage type.

1.  **Open** the relevant rate card in **Rates > Rate card customers** (revenue) or **Rates > Load cost calculation > Contract carrier rates** (cost).
2.  **Select** the charge line where the condition should apply.
3.  **Add** a new condition and **choose** **Stage type**.
4.  **Pick** one or more values: **Transfer**, **Pickup**, **Delivery**, **Empty**.
5.  **Save** the condition.

The condition evaluates to true if any leg in the route matches the selected stage type.

![](https://help.qargo.com/media/934ca8591c0b-image.png)

:::callout{tone="info"}
📚 Stage type conditions evaluate across the full route. An order with both a pickup leg and a transfer leg matches a "Transfer" stage type condition, even if the charge is logically intended for the transfer leg only. To narrow the charge further, combine the condition with a **Resource type** or **Intermodal connection** condition.
:::

* * *

## Resource type condition {#h_d16b7304e3}

The **Resource type** condition checks which resource type is assigned to the load. It is available on both customer price lists and contract carrier rate cards.

1.  **Open** the rate card and the charge line.
2.  **Add** a condition and **select** **Resource type**.
3.  **Choose** **Primary resource** or **Secondary resource**, depending on which side of the assignment the condition should evaluate.
4.  **Pick** one or more resource types: **Trailer**, **Container**, **Chassis**, **Ferry resource**.
5.  **Save** the condition.

![](https://help.qargo.com/media/2cd4b4a72424-image.png)

:::callout{tone="note"}
‼️For the condition to evaluate correctly, the relevant resource must already be assigned to the load when the calculation runs. Cost calculations on unplanned loads will not match a **Resource type** condition until planning is complete.
:::

* * *

## Intermodal connection condition on customer price lists {#h_f61ab00862}

The **Intermodal connection** condition follows the same Intermodal > Connection pattern already used on intermodal cost rate cards.

1.  **Open** the customer price list and the relevant charge line.
2.  **Add** a condition and **select** **Intermodal connection**.
3.  **Pick** the intermodal operator first, then the specific connection (for example, _P&O > STDR-DUB_).
4.  **Save** the condition.

![](https://help.qargo.com/media/ca1df69b8e71-image.png)

:::callout{tone="info"}
📚 The charge applies only when the selected connection appears in the planned route.
:::

* * *

## Intermodal connection condition on contract carrier rate cards {#h_2869877075}

On contract carrier (cost) rate cards, the **Intermodal connection** condition is paired with additional fields that refine the match.

1.  **Open** the contract carrier rate card and the charge line.
2.  **Add** a condition and **select** **Intermodal connection**.
3.  **Pick** the intermodal operator and the specific connection.
4.  **Configure** any additional fields that apply: **Accompanied**, **Number of drivers**, **Resource type**, **Temperature plugin**, **Vehicle/container length**, **Is loaded**.
5.  **Save** the condition.

::video{src="/media/video/92c2bc794360-2026-05-13_12-10-53--281-29.mp4"}

:::callout{tone="info"}
📚 Combining **Intermodal connection** with **Resource type** allows precise cost differentiation: for example, a different cost rate for _STDR-DUB + Trailer_ versus _STDR-DUB + Container_.
:::

* * *

## Combining conditions {#h_883d841b25}

All three new conditions can be combined with each other and with existing rate card conditions. A typical combination on a contract carrier rate card might be:

-   _Stage type IS Transfer_
-   _Intermodal connection IS P&O / STDR-ZEE_
-   _Resource type IS Container_

The charge applies only when all conditions evaluate to true on the planned route.

* * *

## Troubleshooting {#h_9c2de79773}

| **Issue** | **Resolution** |
| --- | --- |
| The condition does not appear in the rate card editor | Confirm that the rate card is a customer price list or a contract carrier rate card. **Intermodal connection** is supported on intermodal-eligible rate cards. |
| The **Resource type** condition does not match | Make sure the secondary resource is assigned to the load. The condition cannot evaluate before planning is complete. |
| Stage type matches when only one leg should trigger the charge | The condition evaluates across all legs in the route. Combine it with a **Resource type** or **Intermodal connection** condition to narrow the match. |
| Existing rate cards still use manual entries for connection-specific costs | New conditions must be added manually. There is no automatic migration tool, and orders that were already invoiced or costed are not recalculated retroactively. |
| The intermodal connection list is empty in the picker | Check that intermodal connections are configured in **Resources > Intermodal operators > Intermodal connections** and that the operator is linked to the relevant rate card. |


## Related articles

- [Rate cards: 'Any stop' conditions and metrics (what, why and how)](https://help.qargo.com/us/articles/669052-rate-cards-any-stop-conditions-and-metrics-what-why-and-how.md)
- [Rate cards – dependent calculations: what, why & how.](https://help.qargo.com/us/articles/669588-rate-cards-dependent-calculations-what-why-how.md)
- [Rate cards: automatically charge load costs to customer orders](https://help.qargo.com/us/articles/600709-rate-cards-automatically-charge-load-costs-to-customer-orders.md)
- [Rate card FAQ: rating by location](https://help.qargo.com/us/articles/320191-rate-card-faq-rating-by-location.md)
- [Add intermodal connections](https://help.qargo.com/us/articles/133803-add-intermodal-connections.md)
