---
title: "Orders – Pallet pools"
description: "Track pallet swaps, balances, and settlements as auditable, billable assets, now with optional comments and manual transactions logged directly from the customer page."
url: https://help.qargo.com/us/articles/396891-orders-pallet-pools
locale: us
updated: 2026-08-21
---

# Orders – Pallet pools

## Introduction  {#h_64147ac404}

Pallets are one of the most widely used tools for transporting goods efficiently and securely. A **pallet pool** is a system that manages the circulation, exchange, and balance of pallets across supply chains. Instead of each company owning and tracking its own pallets, pallet pools allow multiple stakeholders to share and reuse pallets in a structured way. This ensures that pallets are always available where they are needed while reducing costs, losses, and inefficiencies.\
A pallet pool works by recording:

-   How many pallets are **delivered to a location** and how many are **picked up again**.
-   Calculates a **balance** at both the customer and location level, showing whether pallets are owed or returned.
-   Balance can be **settled**, resetting the account between parties.

Such systems not only optimize packaging flows but also create transparency in supply chains, ensuring that logistics partners are held accountable for pallet movements.

* * *

### Terminology {#h_4d5c4597fa}

| **Term** | **Definition** |
| --- | --- |
| **Full pallets** | Pallets loaded with goods. |
| **Empty pallets** | Pallets returned or exchanged, ready to be reused. |
| **Pallet swap** | **Pallet swap** – The process of exchanging pallets during pickup or delivery. |
| **Balance** | The net total of pallets at a customer or location (positive if more were received, negative if more were given away). |
| **Settlement** | The process of resetting pallet balances between parties to zero. |
| **Question path** | A structured set of questions drivers answer in the mobile app to record pallet movements at pickup and delivery stops. |
| **Contract carrier balance** | The net total of pallets exchanged between the tenant and a specific contract carrier, tracking how many pallets the contract carrier is currently holding on the tenant's behalf. |
| **Two-balance architecture** | Qargo's pallet tracking model that maintains two separate balances per order: the tenant–customer balance (commercial) and the tenant–contract carrier balance (operational). |
| **Transaction attribution** | The link between a pallet exchange at a customer location and the contract carrier who physically performed that exchange. |

* * *

### Pallet pools in Qargo {#h_caf35ba5a3}

Qargo integrates pallet pool management directly into its transportation workflows, allowing carriers to **track pallet exchanges** alongside goods. With **_pallet swap tracking enabled_**, users can:

-   **Automatically pre-fill pallet counts** based on order quantities (both full and empty pallets).
-   **Record actual swaps** at pickup and delivery through the driver response.
-   **Manually adjust values** in the system when needed.
-   **Track balances** per customer and location, with clear visibility into positive and negative values.
-   **Settle balances** easily, ensuring accurate records across both customer and location levels.
-   **Apply rating rules** that account for pallet usage, empty pallet returns, or swaps through new rate card metrics.

In Qargo, pallet pool tracking creates a transparent, auditable flow of pallet movements, ensuring that packaging and pallets are treated as valuable assets, not forgotten costs.

* * *

## Configuration {#h_8b6e9f9549}

:::callout{tone="info"}
**🧰 Available to Super Admin users only**
:::

### Step 1: Activate the feature {#h_2cf6257dd6}

-   Navigate to **Configuration > Organization settings > Features**
-   Scroll to the **Packaging / Pallet swaps enabled** panel

    -   Toggle the feature on
-   Select the default pre-fill value for **empty** pallets. Options include:

    -   Don't pre-fill: the value will be left blank and relies on manual input by the user
    -   Pre-fill with 0: the value will default to 0 when empty pallets are left at a pickup or delivery location
    -   Same quantity as full pallets: the default will match the original value from the loaded pallets on the order

![](https://help.qargo.com/media/da3180d55eaf-image.png)

:::callout{tone="note"}
📚 Pre-fills configured in organization settings apply to the empty pallets only.
:::

### Step 2: Enable additional fields for freight {#h_892c183134}

-   Navigate to **Configuration > Additional fields**
-   From the Orders side menu, select **Freight**
-   Select the option for **Packaging / pallet swap activities**

    -   Set the field as active
    -   Select the transportation services this will apply to
-   Click **Save**.

::video{src="/media/video/69d7bcc34ccb-2025-09-01_17-29-12-1-.mp4"}

### Step 3: Enable packaging / pallet swaps on packaging types {#h_7130dd505c}

-   Navigate to **Rates > Order input**
-   From **Freight options** in the side menu, select **Packaging types**

    -   Choose the packaging types that will be enabled for swaps
    -   Set the toggle to the on position
-   Click **Save**

![](https://help.qargo.com/media/08506506d3c6-image.png)

### Step 4: **Create driver question paths to be completed (tasks)** {#h_132af6f38c}

-   Add questions to stop details so the driver can enter in the app how many full / empty pallets are picked up / delivered at locations
-   Navigate to **Configuration > Tasks**
-   Create the question path at the point that best suits the operating workflow

    -   For example: **Loads > Create stop > Loading at pickup**
-   Questions can be added for the following stop activities:

    -   **Pallets loaded at pickup/delivery** = the driver will enter the number of empty pallets loaded at that stop
    -   **Pallets unloaded at pickup/delivery** = the driver will enter the number of empty pallets unloaded at that stop.

![](https://help.qargo.com/media/07229625a0d0-image.png)

:::callout{tone="info"}
📚 Question paths configured here also apply to **contract carriers**. When a load is dispatched to a contract carrier, the same question path will appear in the **Carrier portal**, allowing the contract carrier to record pallet quantities in the same way a driver would in the mobile app.
:::

### Step 5: (Optional) Customer override swaps  {#h_a606d0e2e9}

-   **Default:** Pallet swaps will be tracked on pickup and delivery activities
-   **_Optional:_** A customer override can be set for specific stop activities, and by packaging type.
-   From the customer profile, scroll to **Packaging / pallet swap activities**

    -   **Packaging types** will display the list of available options configured
    -   Select the swap stop activity override. Options include:

        -   Disabled: tracking is not available for this packaging type at either the pickup or delivery stop
        -   Pickup: tracking is only available at the pickup location
        -   Delivery: tracking is only available at the delivery location
        -   \*Pickup/delivery: tracking is available at both the pickup and delivery location (same as default)

            -   If multiple packaging types have specific overrides, this can be selected to make clear which ones use the default

![](https://help.qargo.com/media/34c7fd7744c2-image.png)

:::callout{tone="info"}
📚 The default is to track pallet swaps at both the pickup and delivery locations.
:::

### Step 6: (Optional) Add charges to rate cards {#h_34cf7d2ca5}

-   Charges for pallet swaps can be added as a rate card metric

    -   Available on **Formula** and **Rate table** as metrics
    -   Available as a condition metric

**Formula:**

-   Available as a per-unit charge, based on the total swap activity

    -   For example: £15 per 1 swap

![](https://help.qargo.com/media/cf8ebdd93552-image.png)

**Rate table:**

-   Fixed per freight item: rate table options include both **Has swap** and **Total swap**

![](https://help.qargo.com/media/dbccc0b80ef8-image.png)

-   Multiplied by metric: can be selected as the metric, and both options are available in the rate table configuration.

    -   For example: selecting this will multiply the rate table result based on the quantity

![](https://help.qargo.com/media/6b6874ef8a40-image.png)

**Add as condition:**\
2 options: **Goods (actual)** / **Has swap (Y/N)** or **Total swap**

![](https://help.qargo.com/media/6c707c3e65df-image.png)

* * *

## Pallet swaps workflow {#h_9ea08f4d5c}

:::callout{tone="info"}
📚 Use **Edit column** to show the Pallet swap column in the order list view; in **Planning > Orders**, use the **Customize** button.
:::

![](https://help.qargo.com/media/2bb84db24419-image.png)

### 1.) Build order {#h_a2d1c61d58}

-   When enabled, the default values for pickup / delivery will automatically be included in the order, based on the enabled packaging types

    -   For example: if enabled for Europallets and that is the packaging type used on the order, the number of pallets entered will be used automatically.

![](https://help.qargo.com/media/4a7792d72c9f-image.png)

-   Default tenant settings are used for the empty pallets

![](https://help.qargo.com/media/3551a295f1fd-image.png)

-   An alternate pallet swap stop activity can be selected when building the order

    ![](https://help.qargo.com/media/9c08286a7f6b-image.png)

-   If a customer override is present, it will pre-fill instead of the default.

    ![](https://help.qargo.com/media/97cbdacb198b-image.png)


-   Use **Standalone stops** to add pallet swaps to an order

::video{src="/media/video/eda7745be8e8-2025-09-02_16-40-43-1-.mp4"}

:::callout{tone="info"}
📚 Empty pallets at stop locations can be added to stop notes, which can be included in the load sheet sent to the driver.
:::

![](https://help.qargo.com/media/a5f4e62cb828-image.png)

### 2.) Load operations, including a pallet swap {#h_4f636e3004}

-   Using the question path, drivers can enter the quantity of loaded and empty pallets at locations.
-   The order updates with the details entered by the driver.

::video{src="/media/video/62d16e08689b-2025-09-02_11-50-58-1-.mp4"}

-   The order can be updated manually to add or edit the quantity of pallets

::video{src="/media/video/16a175fbe758-2025-09-02_12-17-05-1-.mp4"}

* * *

## Settle transactions  {#h_a885be810d}

-   The pallet balance can be settled by customer or by location

![](https://help.qargo.com/media/f37c24a4bea6-image.png)

:::callout{tone="info"}
📚 Use the column header filter on **Timestamp** to view a selected number of transactions to update, based on the date and time stamp.
:::

::video{src="/media/video/05b3438fc5db-2025-09-02_14-54-12-1-.mp4"}

-   The pallet balance can be settled on either the customer or the location

    -   An update to the customer will also update the location, and vice versa
-   Negative value = pallet moved from location to carrier (tenant)
-   Positive value = pallet moved from carrier (tenant) to location
-   Missing = value not pre-filled for the empty pallet

    -   Also not completed in the question path

![](https://help.qargo.com/media/ca2b0a4e3a63-image.png)

### Settle customer level  {#h_607db7611f}

-   Required to complete the settlement transaction:

    -   Date / time stamp
    -   Location: single or multiple locations can be added.

        -   If left blank, all pallets within the date/time range will be updated as settled

![](https://help.qargo.com/media/900c66af0492-image.png)

::video{src="/media/video/d41ff9091457-2025-09-02_15-04-44-2-.mp4"}

### Settle location level {#h_e6f119e398}

-   Required to complete the settlement transaction:

    -   Date / time stamp
    -   Customer name

![](https://help.qargo.com/media/51a502974f99-image.png)

::video{src="/media/video/e91f2da0b75e-2025-09-02_15-20-30-1-.mp4"}

:::callout{tone="info"}
📚 Use inline edits to update balances quickly in customers and locations.
:::

![](https://help.qargo.com/media/4f5d106e8907-image.png)

* * *

### Recording empty pallet swaps at stop level (mixed types) {#h_5b0231d3a8}

Empty pallet swaps can now be recorded at the **stop level** as a single transaction per packaging type, independent of the goods lines on the order. This makes it possible to capture mixed-type exchanges (for example, delivering loaded **Euro** pallets and receiving empty **Block** pallets back), including packaging types that are not on the order at all. Previously, empty swaps were limited to like-for-like returns tied to each goods line.

Loaded (full) pallet swaps are unchanged: they stay at the goods level and are created automatically at pickup and delivery, exactly as described in the sections above. Only **empty** swaps move to the stop level.

### How empty swaps are recorded {#h_f07860b966}

-   Empty swaps are captured as one transaction **per packaging type, per stop**, aggregated across all of the order's goods lines. If several goods lines at a stop use the same packaging type, the empties returned for that type are recorded as a single line rather than being split across each goods line.
-   The stop-level pallet swap section is now available on **pickup** and **delivery** stops, not only on the stop types where it appeared before. Each row still captures packaging type, picked-up quantity, and delivered quantity.
-   A read-only summary of the stop-level swaps is shown on the **order detail**, scoped to that order's stops. The editable source of truth remains the stop.

:::callout{tone="info"}
📚 Empty swaps recorded at stop level feed the same customer and location balances as goods-level swaps, so settlement and reporting continue to work without any change to the existing workflow.
:::

* * *

### Recording empty swaps from a driver question path {#h_c5c0efca98}

For tenants using the **Trimble** or **Samsara** board-computer integrations, a question path on a stop can be mapped to a stop-level empty pallet swap transaction, rather than only to a goods-level swap.

1.  **Navigate** to **Configuration > Tasks > Loads**.
2.  **Create** one question path per packaging type to be captured at the stop, for example _How many empty Euro picked up?_ or _How many empty Block delivered?_.
3.  **Map** each question to a stop-level empty pallet swap transaction.
4.  **Save** the question path.

When the driver answers a question on the board computer, each answer writes a single empty transaction for that packaging type at the stop. Questions can be configured for packaging types that are not present on the order, allowing drivers to record unplanned empties they picked up or returned.

:::callout{tone="note"}
🧰 The questions for empty swaps must be configured in advance. A driver enters a quantity against a pre-configured packaging type; the driver does not choose the packaging type on the board computer.
:::

### Automatic empties {#h_5fb335baa9}

-   Tenants that prefer automatic like-for-like empties keep that behavior as a setting. In that case, the stop-level empty transaction is created when the order is created and stays in sync with the total goods quantity, until a driver optionally answers a question and overrides it.

* * *

## Manual settlement {#h_cd19db9756}

**Use case:** At the end of the year, the carrier has a debt of 100 empty pallets, which the carrier needs to record against a specific company and location.

**Solution:**

-   Navigate to the **location** where the pallets need to be recorded
-   From **Packaging / pallet swap balances**, click **Add manual transaction**
-   Enter the details in the pop-up:

    -   Date/time the pallet swap is recorded (this can be backdated if needed)
    -   Company to assign the manual transaction to

        -   The transaction will also be shown in the customer profile
    -   The number of **empty** pallets picked up / delivered at the location
    -   Add an _optional_ comment

![](https://help.qargo.com/media/46e82544b4a1-image.png)

**Result:** A manual transaction allows carriers to quickly record a number of pallets (empty or full) at a specific location, outside of specific loads. Adding it to the location also adds the pallet swap details to the company profile, reducing manual entry and keeping details aligned.

::video{src="/media/video/e5455fc407b9-2026-01-25_16-33-40-1-.mp4"}

:::callout{tone="info"}
📚 The same **Add manual transaction** button is available on the company, contract carrier, and location detail pages.
:::

### Adding a comment to a manual transaction {#h_c536416d0d}

1.  **Click** **Add manual transaction** from the customer detail page or location detail page.
2.  **Complete** the date, packaging type, and quantity fields.
3.  **Enter** an optional note in the **Comment** field.
4.  **Click** **Save**.

The comment is stored with the transaction and displayed in the **Comment** column.

::video{src="/media/video/02c57b6cc25d-2026-06-09_12-10-17--1-.mp4"}

* * *

## Comment column in pallet balance overview {#h_c23c1fec08}

A **Comment** column is now visible in the pallet balance overview table on both the customer and location detail pages. The column displays the comment text when one was entered; the cell is empty when no comment was provided.

![](https://help.qargo.com/media/0a719b6b75a0-image.png)

The **Comment** field is also included in the **Excel export** of pallet balance data.

* * *

## Exporting pallet swap transactions to Excel {#h_bf478ad8db}

All pallet swap transaction records stored against a location can be exported to Excel for reconciliation, reporting, or external sharing.

### How to export {#h_58c9e4823f}

1.  **Navigate** to **Locations** and open the relevant location detail.
2.  **Scroll** to the **Packaging/pallet swap balances** section.
3.  **Select** the packaging type tab to export (for example, _Euro_).
4.  **Click** **Export**, next to the **Settle transactions** button.

:::callout{tone="info"}
📚 The file `packaging-transactions.xlsx` downloads automatically. All records across all pages are included, not only the rows visible on screen.
:::

![](https://help.qargo.com/media/07878eea00cc-Screenshot-2026-06-01-at-09_31_30.png)

### Exported columns {#h_1316e05e18}

![](https://help.qargo.com/media/ab574cb616ef-Screenshot-2026-06-01-at-09_41_14.png)

| **Column** | **Description** |
| --- | --- |
| Timestamp | Date and time the transaction was recorded |
| Packaging type | The packaging type for the transaction |
| Customer/Contract carrier | The company linked to the transaction |
| Order | The associated order reference |
| Load | The associated load reference |
| Display name | Display name of the linked party or location |
| Name | Full name of the linked party or location |
| Address | Street address |
| Address extra | Additional address information |
| ZIP code | ZIP code |
| City | City |
| Country | Country code |
| Full quantity | Number of full units exchanged |
| Empty quantity | Number of empty units exchanged |
| Manual transaction | Indicates whether the entry was added manually |
| Settled | Indicates whether the transaction has been settled |

:::callout{tone="info"}
📚 The export covers one packaging type at a time, matching the tab selected when **Export** is clicked. To export a different packaging type, switch to that tab first and repeat the export.
:::

* * *

## Contract carrier pallet tracking {#h_6d7ca1250d}

When orders are dispatched to a contract carrier, the standard pallet pool flow is extended to track not only the commercial relationship with the customer, but also the physical custody of pallets held by the contract carrier.

### The two-balance model {#h_e3d4804242}

Qargo maintains two separate pallet balances per order:

-   **Tenant ↔ Customer (commercial):** Tracks the contractual pallet relationship with the customer and location, as described in the sections above. This balance already exists and is unaffected.
-   **Tenant ↔ Contract carrier (operational):** Tracks how many pallets the contract carrier is physically holding, has returned, or still owes to the tenant.

The two balances are independent. The customer balance reflects who owes whom pallets contractually. The contract carrier balance reflects who currently has physical custody of those pallets.

:::callout{tone="note"}
📚 Contract carrier pallet tracking is only active when a **single contract carrier** is assigned to the load. Orders with multiple contract carriers do not generate a contract carrier pallet balance.
:::

### How contract carriers register pallet data {#h_f6a5a53ff6}

Contract carriers record pallet quantities through the **Carrier portal** using the **same question path configured in Step 4** above. No additional question path setup is required.

When a contract carrier completes the question path at pickup or delivery, Qargo records two things simultaneously:

1.  The customer/location balance is updated (as normal).
2.  The transaction is **attributed to the contract carrier**, updating the contract carrier balance to reflect the pallets now in the contract carrier's custody.

The tenant can review and confirm or dispute values reported by the contract carrier.

### Viewing the contract carrier pallet balance {#h_1275ad3cf2}

-   Navigate to the relevant **contract carrier page** in Qargo.
-   The pallet balance tab displays:

    -   The **current net balance** per packaging type, expressed in plain language (_e.g. Transport BV owes you 4 pallets or You owe Subco 2 pallets_)
    -   A **full transaction history** showing each exchange, the location where it occurred, and the date
    -   **Unsettled amounts:** pallets that have not yet been formally returned or reconciled

:::callout{tone="info"}
📚 The dashboard and any pallet exports also distinguish between customer transactions and contract carrier transactions, so **_it is possible to filter and report_** on each independently.
:::

### Settling contract carrier transactions {#h_c6047fe234}

Contract carrier balances can be settled in the same way as customer and location balances, typically when the contract carrier physically returns pallets to the tenant's terminal.

**To settle a contract carrier balance:**

1.  Navigate to the **contract carrier page** and open the pallet balance tab.
2.  Select **Settle balance**
3.  Choose the **location (terminal or warehouse)** where the return is being recorded.
4.  Select the **packaging type** and confirm the quantity being settled.
5.  Click **Save**. A settlement line is added to the transaction history and the balance is reduced accordingly.

:::callout{tone="info"}
📚 Settling the contract carrier balance does not affect the tenant–customer balance. The two balances are settled independently.
:::

* * *

## Limitations {#h_4516cc2f35}

-   Pallet swaps are tracked on pickup and delivery activities by default.

    -   This can be overridden at _customer level_, but it is not possible to configure this override at tenant level.
-   Only **one question path per shipment** is supported.

    -   If a shipment has multiple goods, a question path can only be created for one of them.
-   The **number of swapped pallets cannot yet be added to document templates** (invoice, POD).
-   Pallet swaps are **not yet supported via the API**.
-   Contract carrier pallet tracking **_only applies when a single contract carrier_** is assigned to the load. If multiple contract carriers are assigned, no contract carrier pallet balance is recorded.
-   Partial settlement is not supported: the settlement always resets the full open balance for the selected date range. To record a partial settlement (for example, 8 of 12 pallets), settle all transactions and then add a manual transaction for the remaining balance. Use the **Comment** field to document the split (for example: _"Settled 8 of 12 via invoice 1133 — 4 pallets re-added as manual transaction"_).

* * *

## Troubleshooting {#h_43354a9591}

| **Issue** | **Resolution** |
| --- | --- |
| The **Comment** field does not appear on the settlement pop-up | Confirm that **Packaging / Pallet swaps enabled** is toggled on in **Configuration > Organization settings > Features**. Contact a Super Admin if the setting is unavailable. |
| The **Add manual transaction** button is not visible on the customer page | The pallet pool section only appears for tenants with pallet swap tracking enabled. Confirm the feature is active in **Organization settings**. |
| The **Comment** column is not visible in the pallet balance table | Use **Edit columns** to enable the **Comment** column in the table view. |
| The Excel export does not include the **Comment** column | Re-export after the feature has been enabled. Exports from before the feature release do not include the **Comment** column. |


## Related articles

- [FAQ: How to add questions in the Qargo driver mobile app](https://help.qargo.com/us/articles/421743-faq-how-to-add-questions-in-the-qargo-driver-mobile-app.md)
- [Orders: orders list view functions](https://help.qargo.com/us/articles/133839-orders-orders-list-view-functions.md)
- [Orders: order detail view page](https://help.qargo.com/us/articles/133883-orders-order-detail-view-page.md)
- [Orders – Adding multiple packaged items on orders.](https://help.qargo.com/us/articles/567870-orders-adding-multiple-packaged-items-on-orders.md)
- [Cross dock: what it is and how to use it](https://help.qargo.com/us/articles/330616-cross-dock-what-it-is-and-how-to-use-it.md)
