---
title: "How to add third-party non-transportation costs to a load"
description: "Guide to adding costs for third-party contract carriers to loads and managing non-transportation services like cleaning, heating, and handling."
url: https://help.qargo.com/us/articles/213078-how-to-add-third-party-non-transportation-costs-to-a-load
locale: us
updated: 2026-06-16
---

# How to add third-party non-transportation costs to a load

Users can now assign costs to external third parties, even if they are not the ones executing the load _(This includes services like cleaning, customs, heating, handling, etc.).\
​_\
The system now supports adding third parties (named under **Contract carriers**) as a secondary resource type at **load level,** so users can attribute costs to these external parties more accurately.\
​\
​**Step 1: Verify the third-party contract carrier functionality with the Support team**

:::callout{tone="note"}
Before using this feature, confirm with the Qargo support team that the third-party contract carrier functionality is activated in the system. This functionality is not enabled automatically.
:::

![](https://help.qargo.com/media/5fcac33462fc-image.png)

**Step 2: Add third-party contract carriers to the resources**\
Once the functionality is enabled, navigate to the resources section and add the third-party contract carrier to the system as a resource **if it has not been added yet.**

![](https://help.qargo.com/media/a425a87b49fe-image.png)

**Step 3: Verify contract carrier price lists**\
Contract carriers use a default contract carrier price list unless a specific price list has been configured for them. To verify the price list, go to `Rates > Cost calculation trip`.

Check whether the contract carrier has a dedicated price list. If not, it defaults to the system's general contract carrier price list.

![](https://help.qargo.com/media/f3495bcf8f61-image.png)

Make sure the necessary costs are **available and configured** in the contract carrier's price list.\
When using a specific price list, check whether the contract carrier has been added as a linked contract carrier resource.\
Other contract carrier resources can also be linked if needed.

:::callout{tone="info"}
📚 When configured correctly, contract carrier rates apply automatically to loads, which helps ensure accurate cost allocations.
:::

![](https://help.qargo.com/media/42eec835a351-Screenshot-2024-09-17-at-11_04_41.png)

**Step 4: (Optional) Add cost calculations**\
Surcharge calculations can be configured to apply to the contract carrier's costs if needed. Be careful with costs that have the option **"Always add to order"** enabled, as these are automatically applied to the load. If not reviewed carefully, this setting could lead to unintended additional charges being applied to loads. If certain costs, like waiting charges, do not appear in the **"Add cost"** menu, make sure they have been added to the relevant contract carrier price list. Add them either by selecting an existing charge or by creating a standalone charge. Once added to the price list, these charges become selectable for the load.

**Step 5: Add the contract carrier as a third-party contract carrier in the load**\
When creating or editing a load, add the contract carrier as a resource. Navigate to the load page and select the third-party contract carrier from the **"Contract carriers"** section to associate it with the load.

![](https://help.qargo.com/media/d280e430d705-Screenshot-2024-09-17-at-11_05_50.png)

![](https://help.qargo.com/media/ef5b479f6fd3-image.png)

\
​\
**Step 6: Select the contract carrier's surcharges**\
​An extra cost line is then available on the load page to assign costs to this third party.\
​\
Charges can be added to or adjusted in the relevant charge line for this third-party company:

![](https://help.qargo.com/media/5b6101ac328f-image.png)

* * *

## Load tasks for third-party costs {#h_ac15717122}

Load tasks can now be configured to **automatically create tasks for third-party cost contract carriers**. These are external parties added to loads for non-transportation services such as customs handling, cleaning, or port fees.

:::callout{tone="info"}
The **"Third party costs"** option is available in the resource type multi-select when configuring load tasks under **Configuration > Tasks**.
:::

![](https://help.qargo.com/media/da4a20a92759-image.png)

### Why does it exist? {#h_aa7647a114}

Previously, load tasks could only be configured for primary resource types (drivers, contract carriers, vehicles). Third-party cost contract carriers were excluded from automated task workflows, so follow-up had to happen outside Qargo

:::callout{tone="note"}
💬 **Qargo Admin:** Third-party contract carrier functionality must be enabled for the tenant. Contact Qargo Support to activate it if this has not been done yet.
:::

-   **Super Admin:** Navigate to **Configuration > Tasks** and select **Third party costs** in the resource type multi-select for the relevant load task configurations.

### Terminology {#h_949fd1db44}

| **Term** | **Definition** |
| --- | --- |
| Third-party cost contract carrier | An external party added to a load for a non-transportation service (e.g., customs, cleaning, handling) |
| Load task | An automated task triggered when a resource is added to a load |

* * *

### How to configure tasks for third-party cost contract carriers {#h_25cf42458a}

1.  **Navigate** to **Configuration > Tasks**.
2.  **Open** the relevant load task configuration.
3.  **Click** the resource type multi-select dropdown.
4.  **Select** **Third party costs** from the list.
5.  **Save** the configuration.

Once configured, tasks are **automatically created** when a third-party cost contract carrier is added to a new load.

:::callout{tone="note"}
‼️ Tasks are only created for **new loads** after the configuration is updated. Existing loads are not affected retroactively. This only applies to tenants with third-party contract carrier functionality enabled.
:::


## Related articles

- [Load cost calculation](https://help.qargo.com/us/articles/133801-load-cost-calculation.md)
- [Rate card: multimodal rating condition configurations](https://help.qargo.com/us/articles/669575-rate-card-multimodal-rating-condition-configurations.md)
- [FAQ: Troubleshooting and configuring contract carrier profiles, labels, and rating in Qargo](https://help.qargo.com/us/articles/545030-faq-troubleshooting-and-configuring-contract-carrier-profiles-labels-and-rating.md)
- [Rate card: general surcharges](https://help.qargo.com/us/articles/133796-rate-card-general-surcharges.md)
- [Loads: expected vs. actual costs](https://help.qargo.com/us/articles/630077-loads-expected-vs-actual-costs.md)
