---
title: "Pallet location on loading sheet"
description: ""
url: https://help.qargo.com/us/articles/144060-pallet-location-on-loading-sheet
locale: us
updated: 2024-10-24
---

# Pallet location on loading sheet

## Use case {#h_bb6ef15f6e}

* * *

In the warehouse of pallet network terminals, there are 2 main ways of loading the delivery vehicles:\
1/ the inbound trucks ("trunks") arrive at the terminal, and the FLT (forklift truck) drivers immediately take the pallets off the trunks and put them on the delivery vehicles;\
2/ the trunks remain loaded, and the FLTs load the delivery vehicles by picking up the pallets one by one from the trunks they're on

![](https://help.qargo.com/media/4817bb857809-image.png)

\
To support the second use case, the warehouse operators need to know where to look for the pallets (which trunk are they on?).\
​\
For this reason, the last pallet location has been added to the **Loading sheet** document template.\
​\
​

* * *

## Loading sheet vs load sheet (driver manifest) {#h_66885b7970}

The loading sheet and the load sheet are 2 documents with a very similar layout, but they serve different use cases:

-   The loading sheet is designed for the warehouse operator to use when loading the truck
-   The driver manifest is designed for the driver to use during the load

They contain similar information, but the order of the document is reversed. The loading sheet lists the pallets in reverse order of delivery, because a pallet that needs to be delivered last should be loaded first.

![](https://help.qargo.com/media/f5195d6c9c4a-image.png)![](https://help.qargo.com/media/2850717a911f-image.png)

\
Although their layouts are similar, the information available in the template engine is not necessarily the same. As mentioned, the pallet locations are currently **only** available in the loading sheet.\
​\
There is also an alternative layout of the loading sheet that does not resemble the load sheet as closely. The pallet locations are **not** available on this one either:\
​

![](https://help.qargo.com/media/efe897e21015-image.png)

* * *

## When the information is filled in {#h_938b380d26}

When a loading sheet is generated, the column often remains empty, even if it is configured correctly. For example, in the example below, it is filled in for some orders but not for others:

![](https://help.qargo.com/media/0f869797e2c6-image.png)

\
It is important to realize that pallets go through a number of statuses. These can be seen in the TMS when opening the order detail:\
​\
​

![](https://help.qargo.com/media/54f3981e7805-image.png)

\
The information shown in the loading sheet is the **trunk the pallet is on at the moment the loading sheet is generated.**\
This means that if the pallet is not physically on a trunk at that moment, the information column stays empty.\
For example, in the example above:

-   for the order (shipment), the pallet has been delivered ("delivery signed"), which means it is not at the delivery terminal and therefore has no trunk information.


![](https://help.qargo.com/media/25713c7f7b39-image.png)

\
for MWT1698, the pallet is still on the trunk ("delivery terminal scanned in"), which means it is waiting to be unloaded, so the trunk information is present:\
​

![](https://help.qargo.com/media/26e88e689d0c-image.png)


## Related articles

- [Trunk scanning](https://help.qargo.com/us/articles/141347-trunk-scanning.md)
- [Delivery vehicle scans](https://help.qargo.com/us/articles/141355-delivery-vehicle-scans.md)
- [Qargo mobile app: cross dock scanning](https://help.qargo.com/us/articles/283571-qargo-mobile-app-cross-dock-scanning.md)
- [Cross dock: what it is and how to use it](https://help.qargo.com/us/articles/330616-cross-dock-what-it-is-and-how-to-use-it.md)
- [View outbound trunk orders](https://help.qargo.com/us/articles/142098-view-outbound-trunk-orders.md)
